Technical data sheet: Alloy 1.4713
General information:
Alloy: 1.4713 (also known as X10CrAlSi7)
Classification: Ferritic stainless steel
Areas of application: high temperature applications, heat exchangers, furnace components, exhaust systems
Chemical composition:
Carbon (C): 0.12% max.
Silicon (Si): 0.30 - 0.70%
Manganese (Mn): 1.00% max.
Phosphorus (P): 0.04% max.
Sulfur (S): 0.03% max.
Chromium (Cr): 6.50 - 8.00%
Aluminum (Al): 0.30 - 0.70%
Physical Properties:
Density: 7.70 g/cm³
Melting range: 1430 - 1480 °C
Thermal conductivity: 25 - 30 W/(m K)
Electrical Conductivity: 5-10% IACS
Mechanical properties:
Tensile strength: 450 - 650 M
PaYield strength: 250 - 450 MPa
Elongation at break: 30 - 40%
Hardness: 150 - 200 HB (Brinell)
Heat treatment:
Annealing: Between 800°C and 900°C for 1-2 hours, followed by slow cooling in furnace air or with sand or ash.
Corrosion resistance:
Alloy 1.4713 offers good resistance to atmospheric corrosion and oxidation at high temperatures. However, it is less resistant to strong acids and chloride ions.
Weldability:
The weldability of the alloy 1.4713 is good. However, adequate protective measures against intergranular corrosion should be taken before welding.
Note: This information is provided as a general guide only and should not be used as the sole source for design decisions. Before using 1.4713 alloy in specific applications, it is recommended to obtain more detailed information from manufacturers or experts.
